Elegoo Neptune 4 Plus

The differences between the Neptune 4 Plus compared to the Neptune 4 Max are as follows:

1. Smaller print volume of 320 x 320 x 385 mm (for comparison: the Neptune 4 Max has a construction volume of 420 x 420 x 480 mm).
2. The heated bed heats up to a maximum of 110°C (for comparison: the bed of the Neptune 4 Max heats up to a maximum of 85°C).
3. LED light with 24 LEDs (for comparison: the Neptune 4 Max is equipped with 30 LEDs).

Note: In the table below, you can find the technical specifications of both printers for comparison!

Specifications:

• Print volume of 320 x 320 x 385 mm for more creative freedom.
• Pre-installed Klipper with a standard speed of 250 mm/s, maximum speed of 500 mm/s, and maximum acceleration of 12,000 mm/s².
• Input Shaping & Pressure Advance for better print quality.
• Innovative acceleration sensors for axes X and Y.
• Klipper high-speed motherboard ARM 64-bit quad-core processor with a frequency of 1.5 GHz.
• Direct drive extruder with two gears and a gear ratio of 5.2:1.
• Set of high-temperature nozzles for temperatures up to 300°C.
• Efficient cooling system with 9600 rpm.
• Huge print volume.

With a huge print volume of 320 x 320 x 385 mm, you have the opportunity to create unique models in previously unreachable sizes. There is plenty of space here for both large models and several small objects!