Elegoo Neptune 4 Max

Brand: Elegoo

Properties

Description

Properties

Neptune 4 Max by Elegoo is an incredibly fast FDM 3D printer with dimensions of 420 x 420 x 480 mm. With breathtaking maximum speed of 500 mm/s, acceleration of 8000 mm/s², and Klipper firmware, this powerful 3D printer allows you to fully unleash your creativity.

Extruder Type: Direct Drive Extruder Number of Extruders: Single Interfaces: USB Connection, WIFI - WLAN Supported Formats (Slicer): STL, OBJ Heated Bed: Yes Enclosed Print Area: No Filament Diameter: 1.75 mm Build Volume [LxWxH]: 420 x 420 x 480 mm

Delivery Time: 3 weeks!

Description

Differences between Neptune 4 Max and Neptune 4 Plus:

► Larger print volume of 420 x 420 x 480 mm (for comparison: Neptune 4 Plus has a volume of 320 x 320 x 385 mm).

► The heated bed heats up to a maximum of 85°C (for comparison: the bed of Neptune 4 Plus heats up to a maximum of 110°C).

► LED light with 30 LEDs (for comparison: Neptune 4 Plus is equipped with 24 LEDs).

In the table below, you can find the technical specifications of both printers for comparison!

Huge print volume of 420 x 420 x 480 mm.
Pre-installed Klipper with a standard speed of 250 mm/s, maximum speed of 500 mm/s, and maximum acceleration of 8000 mm/s².
Input Shaping & Pressure Advance for better print quality.
Innovative acceleration sensors on the X and Y axes.
Klipper high-speed motherboard with ARM 64-bit quad-core processor clocked at 1.5 GHz.
Direct extruder with two gears and a gear ratio of 5.2:1.
Set of high-temperature nozzles for temperatures up to 300°C.
60W ceramic heater and brass heating block.
Efficient cooling system with 9600 RPM.

With the impressive print volume of 420 x 420 x 480 mm, new possibilities for creating unique models in previously unreachable sizes are opening up before you. Whether you're interested in large objects or several small ones, with this printer, you'll have enough space!